Digital Height Gauge - VMS Series 10
Outstanding Repeatability | 1D and 2D | British Manufactured
Primed as the pinnacle of precision metrology equipment, the Vertex VMS Series 10 has been engineered for highly accurate and repeatable 1D and 2D precision measurements.
The Vertex VMS Series 10 continues the advanced air-bearing system utilised and from the proven Series 9 platform. This ensures that it continues to deliver smooth, frictionless operation that outperforms conventional height measurement equipment, while its enhanced software enables more complex 2D measurement routines.
Advance Air-Bearing System: Its performance is underpinned by an advanced air-bearing arrangement on both the base and Z‑axis carriage, delivering near-frictionless motion that reduces mechanical wear and supports long-term stability in both production and inspection environments.
1D and 2D Measurement: Built on the same proven platform as Series 9, the Series 10 is supplied with 1D and 2D measurement software enabled as standard, delivering advanced measurement capabilities without the need for future upgrades.
Manufactured to be Right: With squareness maintained within 4/8 microns across the front and side planes, the system consistently delivers dependable height measurement results.
Unlike many systems that depend on software correction, the Vertex VMS is a non error‑mapped solution, where accuracy comes from its inherent mechanical build quality rather than digital compensation, giving users greater assurance that measurements represent true part geometry instead of adjusted values.
Intelligent Probing and Features: The Vertex incorporates a motorised probing system with a contactless eddy current clutch and adjustable 40 g probing force, providing controlled, repeatable contact measurement, while the dual probe facility (excluding VMS 250S) simplifies the inspection of different geometries without frequent changeover.
Probe qualification and up to eight configurable datums further enhance traceability across inspection programmes.
Simplifying Operations: For everyday use, the ergonomic orbital keypad and clear, robust display make operation intuitive, with readings easily visible from multiple viewing angles.
A long‑life rechargeable lithium-ion battery delivers more than 10 hours of continuous operation, while RS‑232 connectivity and an optional integral printer streamline data transfer and the production of hard-copy reports.
Quality Assurance You Can Trust: Designed, manufactured and supported in Derby, UK, the Vertex VMS showcases Eley Metrology’s long-standing expertise in precision engineering. Each unit is supplied with UKAS calibration as standard to underpin ISO-compliant quality assurance, reinforcing its status as dependable, high-performance height measurement equipment.
The VMS Series 10 Range:
The Series 10 range is designed to suit a variety of 1D and 2D measurement requirements and working environments.
- VMS 250S - a static model mounted on a dedicated granite base, is ideal for high-volume batch measurement.
- VMS 250 - is suited to small-scale, detailed applications where space may be limited.
- VMS 800 - offers a versatile mid-range solution for everyday measurement tasks.
- VMS 1000 - delivering enhanced precision, for those more demanding applications.
- VMS 1200 - providing a more robust design suited to workshop and manufacturing environments.
- VMS 1550 - largest measurement capacity combined with premium precision performance.
- Custom sizes are also available
- 1D height measurement of components from a surface plate, including steps, shoulders and vertical distances.
- Internal and external diameter (ID/OD) measurement using precision probing.
- Centreline-to-centreline distance measurement for accurate component alignment verification.
- Squareness and perpendicularity checks for machined parts.
- Measurement of slot widths, depths and key geometric features.
- 2D feature-to-feature measurement where relationships between surfaces, edges and holes must be evaluated.
- Ideal for precision engineering environments including aerospace, automotive and advanced manufacturing where both 1D and 2D measurement capability is required.
The Vertex VMS Series 10 digital height gauge is backed by a comprehensive aftersales package, including warranty cover, operator training, and ongoing support from Eley Metrology’s UK-based team.
UKAS calibration services are available to ensure continued accuracy, compliance, and confidence in your precision measurements, with servicing intervals tailored to your usage and environment.
An annual calibration and service is recommended to maintain performance and certification validity, ensuring your height measurement equipment continues to deliver
Technical Specifications Vertex VMS Series 10
|
MODEL
|
MEASURING RANGE (mm)
|
ACCURACY (±µm)
|
RESOLUTION (mm)
|
MEASURING FORCE (N)
|
STRAIGHTNESS (µm)
|
SQUARENESS FRONT & SIDE (µm)
|
WEIGHT (kg)
|
BATTERY TIME (h)
|
|---|---|---|---|---|---|---|---|---|
|
VMS 250S
|
250mm
|
1.3+(L/250)
|
0.0005
|
0.4
|
2 Mechanical
|
4/8
|
31
|
10
|
|
VMS 250
|
250mm
|
1.3+(L/250)
|
0.0005
|
0.4
|
2 Mechanical
|
4/8
|
31
|
10
|
|
VMS 800
|
800mm
|
1.3+(L/250)
|
0.0005
|
0.4
|
2 Mechanical
|
4/8
|
31
|
10
|
|
VMS 1000
|
1000mm
|
1.3+(L/250)
|
0.0005
|
0.4
|
2 Mechanical
|
4/8
|
34
|
10
|
|
VMS 1200
|
1200mm
|
1.3+(L/250)
|
0.0005
|
0.4
|
2 Mechanical
|
4/8
|
34
|
10
|
|
VMS1500
|
1500mm
|
1.3+(L/250)
|
0.0005
|
0.4
|
2 Mechanical
|
4/8
|
34
|
10
|
Related Measurement Solutions
FAQs
How does the Series 10 differ from the Series 9?
Both Series 9 and 10 share the same mechanical platform, air‑bearing system and non error‑mapped accuracy, but Series 10 is supplied with full 1D and 2D measurement capabilities enabled as standard. This allows immediate use of advanced 2D routines — such as perpendicular distances, angles, mid‑points and best‑fit features — without the need for purchasing future software upgrades.
When should I choose Series 10 instead of Series 9?
Choose Series 10 if your parts require regular 2D analysis, for example, feature‑to‑feature distances in X and Z, bolt‑circle/PCD calculations, angles between lines or best‑fit line/circle evaluations. If your current work is predominantly simple 1D height and diameter checks, the VMS Series 9 may be more appropriate.
Can the Series 10 still handle simple 1D work effectively?
Yes. Series 10 performs all 1D tasks; heights, diameters, gaps and centre distances with the same accuracy and ease of use as Series 9. The additional 2D functions sit on top of that core capability, ready when you need them without complicating everyday measurements.
Which Series 10 model should I choose?
The Series 10 range:
- VMS 250S — static, dedicated granite base for high‑volume batch work
- VMS 250 — compact footprint for small parts and limited bench space
- VMS 800 / 1000 — versatile mid‑range gauges for general and demanding applications
- VMS 1200 / 1550 — extended‑range gauges for large components and heavy manufacturing.
- Eley can also supply custom sizes when your components exceed standard capacities.
What 2D measurement tasks can the Series 10 perform?
Series 10 software supports 2D coordinates (Cartesian or polar), perpendicular distances, 2D distances between features, angles from three points or two lines, mid‑points and best‑fit lines/circles. This enables richer geometric inspection of slots, hole patterns, profiles and complex feature relationships using the same probe setup.
Do Series 10 models use the same air‑bearing system as Series 9?
Yes. Series 10 uses the same advanced air‑bearing arrangement on the base and Z‑axis carriage, plus an air‑bearing counterbalance, for smooth, near‑frictionless movement. This underpins its long‑term repeatability and allows it to achieve micron‑level performance without error‑mapping.
What probing and software features are available on Series 10?
The Vertex VMS platform incorporates motorised probing via a contactless eddy‑current clutch, adjustable 40 g probing force, dual probe facility (except VMS 250S), up to eight datums and integrated or external printing options. Series 10 enhances this with our 2D measurement software and advanced routines that simplify complex inspection programmes while maintaining traceability.
How often should a Series 10 height gauge be calibrated and serviced?
As with Series 9, annual UKAS calibration is recommended for most users, with a recommended six‑month interval for harsh or heavy‑duty environments. Eley offers both on‑site and laboratory servicing and calibration to keep performance aligned with ISO 10360‑2 verified specifications.
What storage and operating environment is recommended for Series 10?
Series 10 should be used on a clean, flat Grade 0/1 granite surface plate in a stable 18–22°C environment with low vibration and humidity.